Mondraker PRIME X GREEN/GRAY
| Preis UVP € | 4199,000 |
|---|---|
| Titel | Mondraker PRIME X GREEN/GRAY |
| Laufradgröße | 29 Zoll |
| Rahmenform | Diamant |
| Hersteller | Mondraker |
| Motor | Bosch Performance Line CX Cruise (25Km/h) Smart System |
| Akku | Bosch Powertube 625Wh |
| Display | Bosch Kiox 300 / Bosch Led Remote |
| Rahmen | Prime Xtralite 6061 Full Butted Alloy, Forward Geometry, intenal removable battery, tapered head tube, Boost 12x148mm rear axle, integrated dropout speed sensor |
| Gabel | RockShox Recon Silver RL 29, 120mm, Motion control, Solo Air, tapered steerer tube, Boost 15x110mm axle, 32mm steel stanchions, 42mm offset. Settings: compression adjustment at low-speed to lock, rebound, air preload |
| Bremse | Sram Level T, 2 piece caliper, Centerline 200mm / 180mm IS 6 bolts one-piece rotor, steel-backed organic pad |
| Bremshebel | Sram Level T, Direct Link actuation, tooled reach adjust, lever pivot bushings |
| Schalthebel | Sram Trigger SX Eagle, 12s, X-Actuation 1:1 |
| Schaltwerk | Sram SX Eagle, Type 3 roller bearing clutch, cage lock, long cage, 1x12s, X-actuation 1:1 |
| Schaltauge | Mondraker M068 |
| Kurbelgarnitur | Race Face Aeffect ebike, 165mm |
| Kette | Sram SX Eagle, 12s, Powerlock |
| Kettenblätter | Sram X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD |
| Kassette | Sram PG-1210, 11-50T, 12s |
| Felgen | MDK-HP1 29, 30mm internal width, tubeless ready, 32 spokes |
| Reifen vorn | Maxxis Grifter 29x2.5, single compound, 60TPI, wire bead, tanned wall. |
| Reifen hinten | Maxxis Grifter 29x2.5, single compound, 60TPI, wire bead, tanned wall. |
| Vorbau | MDK Urban 40mm 5º, 6061 forged alloy, 31.8mm barbore |
| Lenker | MDK Urban 1.0 double butted 6061 alloy, rise: 20mm, width: 680mm, 9º backsweep, 5º upsweep, 31.8mm barbore |
| Griffe | Onoff Shaper |
| Sattel | MDK urban |
| Sattelstütze | Onoff Sulfur 0-R, 6061 T6 Alloy, 3D forged, diameter 31.6mm, length 400mm |
| Steuersatz | Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45ºx45º, bottom 51.9x40x8x45ºx45º |
| Nabe vorn | MDK-HP1 29, 30mm internal width, tubeless ready, 32 spokes |
| Nabe hinten | MDK-HP1 29, 30mm internal width, tubeless ready, 32 spokes |
| Pedale | - |
| Ständer | Massload KSA18-40 |
| Scheinwerfer | 50LUX output DC 6-12V, waterproof Alloy cage |
| Rücklicht | Fender Mount, w/ Reflective, e-bike version, 6-12V |
| Schutzblech | Alloy black MDK custom fenders |
| Gepäckträger | Alloy MDK rear Rack, Max loading 25kg |
* gilt für Lieferungen innerhalb Deutschlands, Lieferzeiten für andere Länder entnehmen Sie bitte der Schaltfläche mit den Versandinformationen